Our IT-480 series and IT-545 series are registered to Sustainable Technology Promotion Platform (STePP)of United Nations Industrial Development Organization (UNIDO) Investment and Technology Promotion Office, Tokyo (ITPO Tokyo)

(URL: http://www.unido.or.jp/en/activities/technology_transfer/technology_db/)

<Features>

• High precision: Industry’s highest precision standard thermometer.
• Traceability: Adjustment/Calibration according to the Japanese national standards.
• Product conformity according to various country standards: CE, WEEE/RoHs, FCC, KC, laser pointer related (PSC, FDA)
• Application software: Provided for free of cost
   

▶ Non-contact, non-destructive system allows measurement without damaging the products whether stationary, rotating or moving.
▶ Industry-leading high accuracy and real-time response.
▶ A wide measurement range. -50°C to 1000°C (IT-480F/480P)
▶ Compact, lightweight design allows installation in various devices and production lines.
▶ Allows flexible use. For R&D, experiments, confirmation before the installation of IT-480 etc.
    Easy to set and use anywhere.
    ・USB bus powered type, which requires no external power supply.
    ・Available to mount on the camera tripods.
    Use of Data Acquisition Software (downloadable free of cost)
    ・Up to 8 units of IT-480 can be connected to a Windows® PC by USB cable.
    ・Easy to setup by Windows® PC, and collects temperature data

<Software Screen example-Device Setup>

<Software screen example-Data acquisition>

<Software>

IT-480 Data Acquisition Software "IT-480 Data Acquisition" is software dedicated to the radiation thermometer IT-480 series. Check/Change of Various settings, operation check and data acquisition are available for IT-480 connected to a personal computer via USB with "IT-480 Data Acquisition".
This IT-480 Data Acquisition software is freely downloadable.
Many other items, other than this software are also downloadable.

*To use IT-480 series without this software current output: 4 mA to 20 mA is also available.

Software requirements

• This software functions on PC or tablets installed with either the 32-bit or 64-bit version of Windows 7, Windows 8, Windows 8.1, and Windows 10.
• At least 1 GB of hard disk space is required to install this software.
• A screen resolution of at least 1280 dots X 800 dots (100% scaling ratio) is recommended.

Function

This software can be used to execute the following functions:
• Checking and changing settings
• Auto emissivity setting
• Current output test
• Measurement data collection (maximum of 8 units can be connected)
General-purpose communication software can also be used.

Downloadable items:

• Instruction Manual for the IT-480
• Data Acquisition Software "IT - 480 Data Acquisition"
  • 32 bit.zip
  • 64 bit.zip
  • User Manual for the IT-480 Data Acquisition
• Virtual COM port driver for IT-480
  • driver.zip

  Serial communication with IT-480 is available with communication software such as "Tera Term" or a program created by a customer by installing the virtual COM port driver for IT-480 on the personal computer.
  Check/Change of Various settings and measurement value acquisition for IT-480 are available with serial communication.
  When only IT - 480 data collection software "IT - 480 Data Acquisition" is used, Installation of the virtual COM port driver is not required.

  • Reference Manual for the IT-480 Virtual COM Port Driver

  This software works on personal computers or tablets equipped with Windows 7, Windows 8, Windows 8.1, Windows 10 (32 bit, 64 bit). Operation check is done at factory.
  It does not guarantee the operation on all devices.
  
  Download

Related Industries

• Thermal Power Generation
• Waste to Energy Power Generation
• Biomass Power Generation
• Industrial and Medical Gas Production
• Iron and Steel Production
• Oil Refinery
• Petrochemical Industries
• Environmental Impact Assessment