Ambient Carbon Dioxide Monitor
The APCA-370 is a device for continuous CO2 monitoring in ambient air. It uses cross modulation type non-dispersive infrared (NDIR) absorption method. This method employes one cell and one light source for both sample gas and reference gas what allows precise measurement without generation of zero-drift. Due to precise measurement and long term stability in continuous monitoring as well as its minimal maintenance requirements, this method has been a preferred method for monitoring the atmospheric pollution.
| Model | Ambient CO2 Monitor |
| Measurement target | Carbon dioxide (CO2) in ambient air |
| Measuring principle | Cross modulation type non-dispersive infrared absorption method |
| Range | 0 ppm to 500/1000 ppm |
| Minimum detection sensitivity | 0.5 ppm (2σ) |
| Reproducibility (repeating accuracy) | ±1.0% of the full scale |
| Linearity (readout error) | ±2.0% |
| Zero drift* | ±0.1 ppm/day ±2.0 ppm/week |
| Span drift* | ±2.0% of the full scale/day ±3.0% of the full scale/week |
| Response rate | 60 sec or shorter (T90 from the inlet) |
| Sample collection rate | Approximately 0.7 L/min |
| Display | Measured value, alarm, time, alarm history, calibration history, etc. |
| Alarms | Zero calibration, span calibration, etc. |
*Ambient temperature change: within 5°C
Do you have any questions or requests? Use this form to contact our specialists.
Function Control Unit with Mass Flow Controllers
Function Control Unit by Remote Control
Ambient Air Quality Monitoring System
Automatic Span Gasgenerator Unit
Automatic Span Gas Unit for Parallel calibration
Automatic Span Gas Unit for Serial calibration
Automatic Span Gas Unit Transferstandard
Automatic Span Gas Generator Unit for Quality control at field test
Sampling System
Zero Gas Generator
Explosion-proof Gas Analyzer
Air Pollution Monitor
Hydrocarbon Monitor / THC Analyser
Ambient Carbon Monoxide Monitor
Ambient NOx Monitor
Ambient Ammonia Monitor
Ambient Ozone Monitor
Ambient Sulfur Dioxide Monitor
Ambient Hydrogen Sulfide Monitor
Ambient Air Quality Monitoring System
Continuous Emission Monitoring System
Stack Gas Analysis System
FTIR Exhaust Gas Analyzer Dilute Measurement Type
FTIR Exhaust Gas Analyzer Direct Measurement Type
Trace Gas Monitor
Stack Gas Analyzer
Vapor Concentration Monitor
High-grade type Gas Monitor for Chamber Cleaning End Point Monitoring
Heated Type NOx Analyzer
Heated Type THC Analyzer
Motor Exhaust Gas Sulfur Analyzer
Motor Exhaust Gas Analyzer
Automotive Emission Analyzer
Motor Exhaust Gas Analyzer
FTIR Motor Exhaust Gas Analyzer
Laser Spectroscopic Motor Exhaust Gas Analyzer
On-board Emissions Measurement System
On-board NH3/N2O Measurement System for real-world driving
Portable Gas Analyzer
Process Analyzer System
Tunable Laser Gas Analyzer
Multi-Component Gas Analyzer
Explosion-proof Gas Analyzer
Air Pollution Monitor
Air Quality Monitor
Ambient Carbon Monoxide Monitor
OEM gas (CO/HC) analyzer
OEM gas (NO) analyzer
Continuous Emission Monitoring System
Hydrogen Analyzer
Oxygen/Nitrogen/Hydrogen Analyzer
(Flagship High-Accuracy Model)
Oxygen/Nitrogen Analyzer (Entry Model)
Carbon/Sulfur Analyzer
(Flagship High-Accuracy Model)
Carbon/Sulfur Analyzer (Entry Model)
Carbon/Sulfur Analyzer (Tubular Electric Resistance Heating Furnace Model)
Stack Gas Analysis System
Stack Gas Analyzer
Trace Gas Monitor
Stack Gas Analyzer
Vapor Concentration Monitor
High-grade type Gas Monitor for Chamber Cleaning End Point Monitoring
Laser scanning oil film detector
Motor Exhaust Gas Analyzer
Automotive Emission Analyzer
Motor Exhaust Gas Analyzer
On-board Emissions Measurement System
On-board NH3/N2O Measurement System for real-world driving
Oil concentration meter
Oil concentration meter
Portable Gas Analyzer
Hydrogen Gas Analyzer
Tunable Laser Gas Analyzer
Multi-Component Gas Analyzer
