Size:
3.74
MB
VS70-MC Brochure
| General Spectrometer Specifications* | |
|---|---|
Spectral Coverage | 200 - 910 nm |
Spectrometer Input | Fiber coupled: FC or SMA; other options available upon request. |
Spectral Resolution | < 2 nm |
| Average Spectral Dispersion | 25.2 nm/mm |
Focal Length | 70 mm |
| Options | Selection of high grade sensors: CMOS, B.I. CCD, PDA Input port: SMA, FC, free space, custom input |
F/# | F/2.3 |
| Stray-light Rejection Typical (Maximum) | ≤ 0.4% at all applicable wavelengths by design Measured from 200 nm to 450 nm with a 550OG Schott Glass Filter and a tungsten broadband source |
Wavelength Accuracy | ≤ 0.4 nm (Average Absolute Wavelength Error) |
Software** | LabVIEW™ acquisition software for initial evaluation (DLLs provided for software integration) |
| Detector Options and Specifications* | ||
|---|---|---|
| Linear back-illuminated CCD with large active area and high sensitivity | ||
| Detector Model | Hamamatsu CCD sensor S11071 with high spectral acquisition speed | Cooled Hamamatsu CCD sensor S11851 with high spectral acquisition speed |
| Sensor Format | 2048 x 70 pixels, shorter version available on request | |
| CCD Pixel Size | 14 x 14 μm | 14 x 14 μm |
| CCD Active Area | 28.7 x 1 mm | 28.7 x 1 mm |
| CCD QE | > 75% for 450-700 nm | > 75% for 450-700 nm |
| Sensor Temperature | Uncooled | Cooled (stabilized at 5°C) |
| Maximum Spectral Rate | 770 spectra/s | 770 spectra/s |
| Full Well Capacity | > 235,000 e¯ (typical); >200,000 e¯(minimum) | > 235,000 e¯ (typical); >200,000 e¯(minimum) |
| Readout Noise | 30 e- (typical); 35 e- (maximum) | 30 e- (typical); 35 e- (maximum) |
| Digitization | 16-bit | 16-bit |
| Dynamic Range (FW/RN) | 7,800:1 (typical) | 7,800:1 (typical) |
| SNR | ≥ 447:1 (Typical = 485:1) | ≥ 447:1 (Typical = 485:1) |
| Non-linearity (measured on each system) | < 0.4% (corrected) | < 0.4% (corrected) |
| Dark current @ (25°C) | 50 e-/pix/s (typical); 500 e-/pix/s (maximum) | 7 e-/pix/s (typical); 70 e-/pix/s (maximum) |
| Communication Triger Capability (In and Out) | Single mode: Ethernet/EtherCAT/USB 2.0 Dual mode: Ethernet & EtherCAT simultaneous | Single mode: Ethernet/EtherCAT/USB 2.0 Dual mode: Ethernet & EtherCAT simultaneous |
| Environmental Conditions | Operating temperature 15°C to 40°C ambient Relative humidity <70% (non-condensing) Storage temperature -25°C to 45°C | |
| Power Requirements | 24VDC Power Kycon 9-PIN DB9 Connector | |
* HORIBA Instruments has a policy of continuous product development, and reserves the right to amend part numbers, descriptions and
specifications without prior notice.
**No LabVIEW™ license is needed to run our acquisition software.
Quantum Efficiency
Mechanical Drawings
You can email OEM Technical Sales at: OEM.US(at)horiba.com or contact OEM at: +1.732.494.8660 Ext. 7733